(1) Lu Bochao, Cui Ning*, Zhang Yimeng, Guo Ding, Wang Yanan, Wang Xiaopeng, Duan Jizhou, Effects of Medium and Flow Rate on the Film-Forming Structures of B10 Cu-Ni Alloys and Their Resistance to Corrosion Caused by Sulfate-Reducing Bacteria [J]. Metals, 2024, 14 (12): 1451.
(2) 崔宁，张玉新，王鲁杰，李彤阳，于源，汤华国，乔竹辉, (TiVNbMoW)Cx高熵陶瓷的单相形成过程与碳空位调控研究[J]. 无机材料学报, 2024, 已接收.
(3) Wei Sun; Ning Cui; Shuling Zhang; Tiewei Xu; Xiaopeng Wang; Fantao Kong ; Interface characteristics and mechanical properties of a Ti–TiAl laminated composite, Materials Characterization, 2024, 207: 113468
(4) Wei Sun; Ning Cui; Shuling Zhang; Tiewei Xu; Xiaopeng Wang; Fantao Kong ; Design a Ti6Al4V–Ti43Al9V laminated composite with high strength and fracture toughness, Vacuum, 2023, 217: 112556
(5) Ning Cui*; Saihao Chen; Tiewei Xu; Wei Sun; Binjiang Lv; Shuling Zhang; Hongzhi Niu; Fantao Kong ; The Microstructure, Mechanical Properties, and Corrosion Resistance of a Novel Extruded Titanium Alloy, Metals, 2022, 12(10): 1564
(6) Cui Ning, Bi Kexiao, Sun Wei, Wu Qianqian, Li Yinan, Xu Tiewei, Lv Binjiang, Zhang huling, Effect of Pyrolysis Conditions on the Performance of Co–Doped MOF–Derived Carbon Catalysts for Oxygen Reduction Reaction [J]. Catalysts, 2021, 11 (10): 1163.
(7) Zhang Shuling, Cui Ning*, Sun Wei, Li Qiucheng, Microstructural Characterization and Crack Propagation Behavior of a Novel β-Solidifying TiAl Alloy [J]. Metals, 2021, 11 (8): 1231-1241.
(8) Ning Cui*, Qianqian Wu, Kexiao Bi, Jin Wang, Tiewei Xu, Fantao Kong, Effect of multi-directional forging on the microstructure and mechanical properties of β-solidifying TiAl alloy [J], Materials 12(9) (2019) 1381. (SCI 收录，IF=2.972)
(9) Ning Cui*, Qianqian Wu, Kexiao Bi, Tiewei Xu, Fantao Kong, Effect of heat treatment on microstructures and mechanical properties of a novel β-solidifying TiAl alloy [J], Materials 12(10) (2019) 1672. (SCI 收录，IF=2.972)
(10) Fantao Kong, Ning Cui, Yuyong Chen, Xiaopeng Wang, A novel composition design method for beta-gamma TiAl alloys with excellent hot workability [J], Metall Mater Trans A 49(11) (2018) 5574-5584. (SCI 收录，IF= 1.985)
(11) Ning Cui, Fantao Kong, Xiaopeng Wang, Yuyong Chen, Haitao Zhou. Microstructural evolution, hot workability and mechanical properties of Ti-43Al-2Cr-2Mn-0.2Y alloy [J]. Materials & Design, 2016, 89: 1020-1027. (SCI 收录，IDS 号为CY2FW，IF=3.501)
(12) Ning Cui, Fantao Kong, Xiaopeng Wang, Yuyong Chen, Haitao Zhou. Hot deformation behavior and dynamic recrystallization of a β-solidifying TiAl alloy [J]. Materials Science and Engineering: A, 2016, 652: 231-238. (SCI收录，IF=2.567)
(13) Ning Cui, Xiaopeng Wang, Fantao Kong, Yuyong Chen, Haitao Zhou. Microstructure and properties of a beta-solidifying TiAl-based alloy with different refiners [J]. Rare Metals, 2016, 35(1): 42-47. (SCI收录，IDS 号为DA2BU，IF=1.009)
(14) Fantao Kong, Ning Cui, Yuyong Chen, Xiaopeng Wang, Ningning Xiong. Characterization of hot deformation behavior of as-forged TiAl alloy [J]. Intermetallics, 2014, 55: 66-72. (SCI收录, IF=2.131)
(15) 孔凡涛, 崔宁, 陈玉勇, 熊宁宁. Ti-43Al-9V-Y 合金的高温变形行为研究 [J]. 金属学报, 2013, 49(11): 1363-1368.(SCI 收录，IF=0.548)
(16) Fantao Kong, Ning Cui, Yuyong Chen, Deliang Zhang, Yongjun Su. Microstructure and mechanical properties of TiAl alloys produced by powder metallurgy [C]. TMS, San Diego, USA, 2014: 203-205. (EI 收录号：20152500961759)
(17) 孔凡涛, 崔宁, 陈玉勇, 訾凌君. Ti-43Al-9V-Y 合金包套热轧热力耦合有限元模拟 [J]. 中国有色金属学报, 2013, 23(S1): 718-721.
(18) 陈玉勇, 崔宁, 孔凡涛. 变形TiAl 合金研究进展 [J]. 航空材料学报, 2014, 34(4): 112-118.
